A pool heating pump is a device designed to heat swimming pool water by transferring heat from the surrounding air or ground to the pool water. This type of heating system is energy-efficient and eco-friendly, making it an ideal choice for pool owners who want to reduce their energy consumption and carbon footprint.
Pool heating pumps work by extracting heat from the air or ground using a refrigerant that circulates through a closed loop. This heat is then transferred to the pool water using a heat exchanger, raising the temperature of the water.
There are two main types of pool heating pumps: air-source and ground-source. Air-source pumps extract heat from the air and are suitable for use in moderate climates where the temperature does not drop below freezing. Ground-source pumps, also known as geothermal pumps, extract heat from the ground and are suitable for use in colder climates.
One of the key advantages of pool heating pumps is their energy efficiency. They use less energy than traditional heating systems because they do not generate heat; instead, they transfer existing heat from the environment to the pool water. This can result in significant cost savings over time.
Pool heating pumps also offer a more consistent and reliable source of heat compared to solar or gas heating systems, which can be affected by weather conditions. Additionally, pool heating pumps are easy to install and require minimal maintenance.
FibroPool models people buy the most
A pool heating pump is a great investment for any pool owner who wants to extend their swimming season, reduce their energy consumption, and lower their carbon footprint. These are the two most popular models that the FibroPool brand has to offer.
FibroPool FH120
The FibroPool FH120 above-ground swimming pool heat pump is a compact and efficient device designed to heat above-ground swimming pools. It is suitable for use in pools up to 7,500 gallons in size and can raise the water temperature by up to 10°F in just a few hours, depending on the ambient temperature.
One of the key features of the FH120 heat pump is its compact size, which makes it easy to install and store when not in use. It measures just 10″ x 14″ x 24″ and weighs only 50 pounds, making it one of the most portable and lightweight heat pumps on the market.
The FH120 uses a high-efficiency compressor and titanium heat exchanger to transfer heat from the surrounding air to the pool water. It has a heating capacity of 20,000 BTUs per hour, which means it can quickly and effectively heat smaller above-ground pools.
The heat pump is also designed to be energy-efficient and eco-friendly, with a low operating cost and minimal carbon footprint. It uses R410A refrigerant, which is ozone-friendly and has a low global warming potential.
The FH120 heat pump is easy to install and operate. It comes with a digital control panel that allows you to set the desired water temperature and monitor the device’s performance. The device is also equipped with a self-diagnostic feature that alerts you to any potential issues and helps you troubleshoot them.
Overall, the FibroPool FH120 above ground swimming pool heat pump is an excellent choice for pool owners who want an efficient, portable, and eco-friendly way to heat their above-ground swimming pools. It is easy to install, operate, and maintain, and can help you extend your swimming season while reducing your energy consumption and carbon footprint.
FibroPool FH120 installation requirements
- Minimum clearance from sides: 8 feet
- Minimum clearance from top: 4 feet
- Minimum clearance from rear: 6 feet
- Clearance for service access: 3 feet on all sides
- Foundation: Must be level and able to hold the weight of the unit (260 lbs.)
- Electrical: Must be installed by a licensed electrician and meet all local and national electric codes
- Water connection: Must be completed by a licensed plumber and meet all local and national plumbing codes
- Flow switch: A flow switch must be installed to ensure proper operation and prevent damage to the unit
- Ambient air temperature range: Must be between 45°F and 104°F for proper operation
- Altitude restriction: Must not be installed at an elevation above 2,000 feet
- Grounding: The unit must be properly grounded to prevent electrical shock and damage.
FibroPool FH120 heat pump specifications
- Heating capacity: 120,000 BTUs
- COP (Coefficient of Performance): 6.2 (based on 80°F air temperature and 80°F water temperature)
- Voltage: 240 V
- Amperage: 33.3 A
- Minimum circuit ampacity: 37 A
- Maximum recommended breaker size: 60 A
- Water flow rate: 30-70 gallons per minute
- Heat exchanger: Titanium
- Refrigerant: R410A
- Fan motor: Variable speed, 1100 RPM maximum
- Compressor: Scroll type, 2 stage
- Cabinet: Galvanized steel with powder coating
- Dimensions: 36.6″ L x 31.9″ W x 36.6″ H
- Weight: 260 lbs.
- Maximum ambient air temperature for operation: 104°F
- Minimum ambient air temperature for operation: 45°F
- Sound level: 56 dB(A) at 10 feet
- Warranty: 2 years on parts, 10 years on compressor and heat exchanger
FibroPool FH055
The FibroPool FH055 above ground swimming pool heat pump is another efficient and compact device designed to heat above-ground swimming pools. It is suitable for use in pools up to 10,000 gallons in size and can raise the water temperature by up to 15°F, depending on the ambient temperature.
One of the key features of the FH055 heat pump is its high efficiency and low operating cost. It uses a high-efficiency compressor and a titanium heat exchanger to transfer heat from the surrounding air to the pool water. This results in a low operating cost and a minimal carbon footprint, making it an eco-friendly choice for pool owners.
The FH055 has a heating capacity of 55,000 BTUs per hour, which means it can quickly and effectively heat above-ground swimming pools of various sizes. It is also equipped with a digital control panel that allows you to set the desired water temperature and monitor the device’s performance.
The heat pump is easy to install and operate. It comes with all the necessary installation hardware and can be connected to your existing pool pump and filter system. The device is also equipped with a self-diagnostic feature that alerts you to any potential issues and helps you troubleshoot them.
Another advantage of the FH055 heat pump is its durability. It is built with a rugged and weather-resistant cabinet that can withstand exposure to the elements. The device also comes with a one-year warranty, providing you with peace of mind and protection against any potential defects or malfunctions.
Overall, the FibroPool FH055 above ground swimming pool heat pump is an excellent choice for pool owners who want an efficient and reliable way to heat their above-ground swimming pools. It is easy to install, operate, and maintain, and can help you extend your swimming season while reducing your energy consumption and carbon footprint.
FibroPool FH005 installation requirements
- Minimum clearance from sides: 4 feet
- Minimum clearance from top: 4 feet
- Minimum clearance from rear: 2 feet
- Clearance for service access: 3 feet on all sides
- Foundation: Must be level and able to hold the weight of the unit (110 lbs.)
- Electrical: Must be installed by a licensed electrician and meet all local and national electric codes
- Water connection: Must be completed by a licensed plumber and meet all local and national plumbing codes
- Flow switch: A flow switch must be installed to ensure proper operation and prevent damage to the unit
- Ambient air temperature range: Must be between 45°F and 104°F for proper operation
- Altitude restriction: Must not be installed at an elevation above 2,000 feet
- Grounding: The unit must be properly grounded to prevent electrical shock and damage.
FibroPool FH005 heat pump specifications
- Heating capacity: 55,000 BTUs
- COP (Coefficient of Performance): 6.5 (based on 80°F air temperature and 80°F water temperature)
- Voltage: 240 V
- Amperage: 20 A
- Minimum circuit ampacity: 22 A
- Maximum recommended breaker size: 40 A
- Water flow rate: 15-55 gallons per minute
- Heat exchanger: Titanium
- Refrigerant: R410A
- Fan motor: Variable speed, 1100 RPM maximum
- Compressor: Scroll type, 2 stage
- Cabinet: Galvanized steel with powder coating
- Dimensions: 28.75″ L x 24.5″ W x 28.75″ H
- Weight: 110 lbs.
- Maximum ambient air temperature for operation: 104°F
- Minimum ambient air temperature for operation: 45°F
- Sound level: 56 dB(A) at 10 feet
- Warranty: 2 years on parts, 10 years on compressor and heat exchanger
FibroPool FH120 vs FH055
The FibroPool FH120 and FH055 above ground swimming pool heat pumps are both efficient and compact devices designed to heat above-ground swimming pools. While they share some similarities, they also have some differences that are worth considering when choosing between the two models.
One of the key differences between the FH120 and FH055 is their heating capacity. The FH120 has a heating capacity of 20,000 BTUs per hour, which means it is suitable for use in smaller above-ground swimming pools up to 7,500 gallons in size. The FH055, on the other hand, has a heating capacity of 55,000 BTUs per hour, which means it can effectively heat larger above-ground swimming pools up to 10,000 gallons in size.
Another difference between the two models is their size and weight. The FH120 is smaller and lighter than the FH055, making it more portable and easier to store when not in use. The FH120 measures 10″ x 14″ x 24″ and weighs 50 pounds, while the FH055 measures 25″ x 22″ x 31″ and weighs 110 pounds.
The FH055 also comes equipped with a slightly more advanced control panel than the FH120. The FH055 control panel features a larger LCD screen and more options for setting and monitoring the water temperature. However, both models have a user-friendly digital control panel that is easy to operate.
Finally, there is a difference in heating capability between the two models. The FH055 can heat the pool water by up to 15°F, while the FH120 can heat the pool water by up to 10°F. This means that the FH055 is capable of achieving a higher water temperature, which can be beneficial in colder climates or during particularly chilly weather.
In summary, the key differences between the FibroPool FH120 and FH055 above ground swimming pool heat pumps are their heating capacity, size and weight, control panel features, and heating capability. The choice between the two models ultimately depends on the size of your above-ground swimming pool, your heating needs, and your personal preferences for device size and features.
Conclusion
Anyone who owns an above-ground swimming pool and wants to extend their swimming season should consider buying a FibroPool FH120 or FH055 heat pump. These devices are designed to efficiently and effectively heat above-ground swimming pools, making them more comfortable and enjoyable to use in colder weather.
Additionally, these heat pumps are an excellent choice for pool owners who want to reduce their energy consumption and carbon footprint. They use advanced heat transfer technology to extract heat from the surrounding air and transfer it to the pool water, resulting in lower operating costs and minimal environmental impact.
The FH120 heat pump is ideal for those who own smaller above-ground swimming pools up to 7,500 gallons in size, while the FH055 heat pump is suitable for larger above-ground swimming pools up to 10,000 gallons in size. Therefore, pool owners should consider the size of their pool when choosing between the two models.
Furthermore, the compact size and ease of installation of these heat pumps make them an ideal option for pool owners who want a device that is easy to set up and operate. They come with all the necessary installation hardware and can be connected to your existing pool pump and filter system.
In summary, pool owners who want a cost-effective, energy-efficient, and environmentally friendly way to heat their above-ground swimming pool and extend their swimming season should consider purchasing a FibroPool FH120 or FH055 heat pump. These devices offer reliable and effective pool heating and are an excellent investment for anyone who wants to make the most of their above-ground swimming pool.